Dasic Marine - Ancillary Equipment

Construction: Fully woven polyester reinforcement, which through extrusion, is totally encased with a thermoplastic elastomer (polyurethane) completely bonding both the internal lining and outer cover eliminating separation problems.

Electrostatic Protection: Two stainless steel braids at 180° to each other, fully protected by encapsulation in the cover.
Diameters: 38 mm (1½”) and 50 mm (2”)
Lengths: Up to 30 metres - longer lengths on request.
Minimum- Burst Pressure: 41 Bar (600 psi)
Maximum advised working pressure: 20.5 Bar (300 psi)
Temperature range: -48°C to 98°C
Approximate weights (without couplings): 38 mm (1½“) - 0.3 kgs per Metre.
50 mm (2”) - 0.5 kgs per Metre
Colour: Yellow

As a guide to the comparative weight saving a typical 15m (50') x 50mm (2") rigid rubber hose fitted with couplings weighs - 30kg
A similar length of Dasic Layflat Hose fitted with couplings weighs - 10.5kg

For further information on any DASIC product or technical assistance on your Gas Freeing requirements please contact us direct at the address shown or through your local area representative.